Across the nation, there are thousands of people who are extremely passionate about building and racing remote controlled cars. If you ask one of them how much money they could spend on building a remote controlled car, you will be surprised at the answer. It is possible to spend hundreds and hundreds of dollars on top notch equipment to create an insanely fast and good looking car. If you want to get into the hobby of building radio controlled projects, then you will definitely have to spend some money along the way. You will be faced with very expensive components. However, you don’t need to buy expensive parts for your first car. Read on to find out some of the ways that you can save money.

You should never buy cheap supplies just because they are cheap. If this is your first radio controlled car, you want to get an accurate feel for the hobby without spending too much. This is why you want to buy top quality parts that will make for a great car. At the same time, you may find that the hobby is not for you at all. You may burn out on it after just a few hours of putting together your model. If this is the case, that is another even better incentive to avoid buying expensive parts for your first car. Usually hobbyists will start to invest more money and more time in their 2nd or 3rd car, after they know that they have the expertise to do it right.

The best way to build your first radio controlled car is to buy a kit that includes just the radio components and the motors. The radio control kits only cost 20 or 30 dollars at your local craft store. Buy it before you start to put the car together, so that you can know what dimensions you need to allow for. You can build the car itself from cheap wood and glue (And time. Lots of time.) Go to your local hobby store or lumber store and look for some sort of light wood that you can use to make the car. You will use some sort of epoxy or superglue to hold it all together.
(more…)

Amateur radio or ham is largely a hobby activity. The majority of thel hobby time is spent on making contact and having conversations with people in distant regions and from different cultures. Two way communications, identifying their location and station, zone, region and place is the usual custom. This is always followed by other casual communications. If the contact is made for a contest to make two way communication with as many stations or ham radio operators as possible, this all the information that is shared.

DX-ing and DX-peditions:
An amateur radio operator’s main hobby is to make contact with as many stations as possible from as many parts of the world as possible. DX stands for Distant Stations. The DX-ing usually is followed with the QSO. (a Q code., see below) which means “a conversation”.

DX-peditions are different in the sense that they are expeditions organized / planned solely for the purpose of making contacts with some special or rare stations and regions. Some people travel long distance just to make contact with some unrepresented region or place.

Radio Frequency scanners available now a days form the tool of great use in these attempts. The radio scanner scans for signals until a strong signal is found and so on.

QSL cards:
The Q code is a standardized collection of three-letter message encodings, all starting with the letter “Q”, initially developed for commercial radiotelegraph communication, and later adopted by other radio services, especially amateur radio. In today’s audio signal transmission age, the Q codes are not essential. but still in use and are viewed as a sort of tradition.
(more…)